Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 129)

113 CHAPTER 7
Troubleshooting
R - View Input States
Enter
Diagnostics
STABILITY
TEST
Activate the
test and
review the
results.
PASS PASS
These are dry contact
closures. Allowing
110 VAC in the input
will damage the unit.
Contact Hardy
Technical
Support for
repair.
Verify contact is
being made between
the connector
common to the input
desired.
Use a jumper to
physically make the
connection and verify
operation.
R
No
The Input States display shows
whether or not the instrument
has any inputs activated. This
provides a way of testing the
inputs before actually starting
the process.
Yes