IAI America CON-PG - Manual (Page 98)

92
6. Operation of SEP
Controllers
6.2 Transition of Operating States
Transition of operating states when the touch-panel teaching pendant CON-PT is connected to a
SEP controller is shown.
Monitor
Power ON
Title display
* Displayed for 1
second.
Version display
Axis selection If multiple axes are connected
If the auto monitor
function is enabled
SEP menu
Edit – If the
password function
is enabled
Pos. Edit
Password entry
Position setting – List
Monitor
Operation pattern 0
Operation pattern 3
Operation pattern 1
Operation pattern 4
Operation pattern 2
Operation pattern 5
Position setting – List
Position setting – Itemized
(A different screen is provided
for each operation pattern.) Jog
Inching Operation pattern 1
Position setting – Itemized Position setting – List
On CON-PT pendants, this
screen is displayed when
the enable function
parameter of the controller
is set to [Enable].
On CON-PD/PG pendants,
this screen is displayed
when the enable function
parameter of the controller is
set to [Disable].
Enable function parameter is
set “Enable” .
Change to “Disable”?
If no single initial setting has
been performed after the
purchase, the display will
switch to the initial setting
change confirmation screen
automatically.
PSEP