IAI America CON-PG - Manual (Page 84)

78
5. Operation of CON Controllers
5.11 Alarm List
A list of alarms that may generate after the controller power is turned on is shown. [For alarm details, refer
to 8, "Error Display."]
Touch [Alarm List] on the Menu 1 screen.
A screen appears, indicating the an alarm list being acquired.
The controller's alarm list appears. The alarm list consists of pages 0 to 15.
Model other than SCON-CA,
PCON-CA and ERC3 PIO converter
Touching >Ĺ] displays the next page.
Touching >Ĺ] displays the previous page.
Touching Erase clears all alarm details.
(Note) PowerUP No Error indicates that the controller power was turned on.
It does not indicate an error.
The time of occurrence of each alarm is indicated by an elapsed time from this PowerUP No Error.
5.11 5.11