IAI America CON-PG User Manual
Page 81
75
5. Operation of CON Controllers
5.8.3
Direct Movement Operation
A position is specified directly to move the axis.
x [SV ON]:
Touching [SV ON] while the servo is off turns on the axis servo and O becomes
lit. Touching [SV OFF] while the servo is on turns off the axis servo and O
becomes unlit.
x [HOME]:
Touching [HOME] while home return is not yet completed causes the axis to
return home and O becomes lit.
x [Target Pos]:
Touching [Target Pos] displays the numeric keypad. Enter a desired target
position and then touch [ENT].
x [Velocity]:
Touching [Velocity] displays the numeric keypad. Enter a desired speed and
then touch [ENT].
x [Move]:
Touching [Move] moves the axis to the target position you have set. The current
position can be checked by the display in Current Pos.
x [Stop]:
Touching [Stop] stops the axis.
x [Menu1]:
Move to the Menu 1 screen.
5.9.3