IAI America CON-PG - Manual (Page 53)

47
5. Operation of CON Controllers
[Inching operation]
You can acquire position data via inching operation.
Operation on the inching screen
x [Inching-], [Inching+]: Touching each button once moves the axis by inching. [Inching-] moves
the axis in the negative direction, while [Inching+] moves the axis in the
positive direction.
x [SV ON]: Touching [SV ON] while the servo is off turns on the axis servo and O
becomes lit. Touching [SV OFF] while the servo is on turns off the axis
servo and O becomes unlit.
x [HOME]: Touching [HOME] while home return is not yet completed causes the axis
to return home and O becomes lit.
x [Chg Dis]: The inching distance changes in the order of 0.01, 0.10, 0.50, 1.00 and
5.00 mm every time [Chg Dis] is touched.
x [Jog]: Touching [Jog] changes to the jog screen.
Position acquisition operation
Touch [Acquire]. A confirmation screen appears.
You can touch [
n] or [p] to change the position number.
Touching [Yes] acquires the current position.