5 changing operating axis – IAI America CON-PG User Manual

Page 103

Text mode
Original mode

6. Operation of SEP

Controllers

6.4 Changing

Operating

Axis

If multiple controllers are connected to the communication line, the axis selection screen appears.
This screen also appears when [Change Operate Axis] is touched on the menu screen.
If only one controller is connected, you need not select an axis.

Select and touch the axis you want to connect the touch-panel
teaching pendant to.

Connection with the selected controller axis starts.

When connection with the controller is established, the SEP
menu screen appears.

PSEP

wzlwG

6.5

This manual is related to the following products:

CON-PD CON-PT