IAI America CON-PG - Manual (Page 199)

193
7. Operation of MEC Controllers
7.9 Maintenance – Parameters
Set the parameters and axis number. You can change the system password and reset all parameters
to their factory defaults.
Touch on the MEC menu screen.
Touch [Parameter].
Touch [Menu] to return to the MEC menu screen.
Before the display switches to the initial setting screen, the password entry screen appears if the
password is other than “0000.”
Enter the password using the numeric keypad, and then
touch [ENT].
The password is “5119” (factory setting).
A desired password can be set using the “system
password” parameter accessible from the maintenance
menu.
Select and touch [Edit Parameter], [Init Parameter] or
[System Password].
7.10