IAI America CON-PG - Manual (Page 93)

87
5. Operation of CON Controllers
[Light off time]
Touching [Light off time] displays the numerical keypad.
Enter a desired time after which the screen light turns off when
no operation has been performed, and then touch [ENT].
Touch [Write].
(Note) If Write is not performed, the new setting will not
become effective after the controller is restarted.
[Change System Password]
You can change the system password.
Touch [Change System Password].
If the system password is set, you must enter the password currently set.
Enter the new password to change to.
Touch [ENT].
Touch [Change].
[Data Input Warning]
5119
Touching [Effect] outputs a warning message in the case that the speed
set value is less than the lower limit value, or the acceleration has been set
to the value more than the rated one.
When [NonEffect] is selected, such warning message is not output.