IAI America CON-PG - Manual (Page 101)

95
6. Operation of SEP
Controllers
6.2 Initial Screen
Upon connection to the controller, power is supplied to the touch-panel teaching pendant and
processing starts.
When the power is turned on, the IAI logo is displayed for approx. 1 second on the operation display
screen (hereinafter referred to as "operation screen") of the touch-panel teaching pendant, after
which version information is displayed.
The menu screen appears.
On CON-PD/PG pendants,
this screen is displayed when
the enable function parameter
of the controller is set to
“Disable.” On CON-PT pendants, this
screen is displayed when the
enable function parameter of
the controller is set to
“Enable.”
Enable function parameter is
set “Enable”.
Change to “Disable”?
* The same items can be set on the
automatic monitor setting screen
accessible from the environment
setting screen of the controller.
PSEP
PSEP
wzlw
If multiple units are connected, the
axis selection screen appears.
Select the axis you want
to connect.
[Refer to 6.3, "Changing
Operating Axis."]
[Refer to 6.5, “Menu Selection.”] [Refer to 6.6, “Monitor.”]
6.3