IAI America CON-PG - Manual (Page 151)

145
6. Operation of SEP
Controllers
[Axis No. Set] Set the axis number.
Touch Axis No.
When the numeric keypad appears, enter a desired value and
then touch [ENT].
Touch [Execute].
In this example, 15 is set.
[Init Parameter]
The parameters are reset to their factory default settings.
Touch [Yes].
Touch [No] to return to the parameter menu screen without
resetting the parameters to their factory default settings.
Touch [Yes].
The controller is restarted.
The controller operate according to the factory-set parameters.
The display returns to the initial setting screen.
Touch [No], and the controller will not operate according to the
factory-set parameters until restarted.
15