IAI America CON-PG User Manual
Page 79
73
5. Operation of CON Controllers
[Inching operation]
You can perform inching operation.
Operation on the jog screen
x [Inching-], [Inching+]: Touching each button once moves the axis by inching.
[Inching-] moves the actuator in the negative direction.
[Inching+] moves the actuator in the positive direction.
x [SV ON]:
Touching [SV ON] while the servo is off turns on the axis servo and O
becomes lit. Touching [SV OFF] when the servo is on turns off the axis
servo and O becomes lit.
x [HOME]:
Touching [HOME] while home return is not yet completed causes the axis
to return home and O becomes lit.
x [Chg Dis]:
The inching distance changes in the order of 0.01, 0.10, 0.50, 1.00 and
5.00 mm every time [Chg Dis] is touched.
x [Jog]:
Touching [Jog] changes to the jog screen.
x [Menu1]:
Move to the Menu 1 screen.