IAI America CON-PG User Manual
Page 134
128
6. Operation of SEP
Controllers
6.10 I/O Setting (Setting of Operation Parameters, Etc.)
You can select an operation pattern (PIO pattern) (0 to 5), set an operation mode (single solenoid,
double solenoid), etc.
Touch [Initial Set] on the SEP menu screen.
Touch [I/O set]
Touch [Menu] to return to the SEP menu screen.
The password entry screen appears before the initial setting screen.
Enter a password value from the numeric keypad, and then
touch [ENT].
If the correct password has been entered, the display changes to the screen for setting the operation
pattern.
Select and touch one of operation patterns 0 to 5, and then
touch [OK].
The password is "5119" (default setting).
6.11