IAI America CON-PG - Manual (Page 102)

96
6. Operation of SEP
Controllers
6.3 Initial Setting
When the power is turned on for the first time after the delivery of the controller, the initial setting
screen will appear.
x Select [Yes], and the display will change to the I/O setting screen where you can set the
operation pattern (PIO pattern). Select a desired operation pattern and, depending on the
selected operation pattern, also set the single-solenoid, double-solenoid or other operation mode.
x Select [No], and the factory set operation pattern, or specifically operation pattern 0 of double-
solenoid mode, will remain effective.
Factory settings
x Operation pattern 0
x Double-solenoid
mode with
continuous current flow
x No servo control
x Home
return MANU
x Output mode LS
[Refer to 6.10, “I/O Setting.”]
[Refer to 6.9, “Position Setting.”]
No Yes
6.4