IAI America CON-PG User Manual
Page 145
139
6. Operation of SEP
Controllers
6.11 Parameters (Parameter Editing, Axis Number Setting, Parameter Initialization to
Factory Default Settings, System Password)
Parameters and axis number are set. You can change the system password or reset the parameters
to their factory default settings.
Touch [Initial Set] on the SEP menu screen.
Touch [Parameter].
Enter a password value from the numeric keypad, and then
touch [ENT].
Select and touch [Edit Parameter], [Axis No. Set], [Init.
Parameter] or [System Password].
The password is "5119" (default setting).
6.12