Preparations, For rs232c communications only, Connection with console – Panasonic MINAS E-series User Manual
Page 31: Connect to cn x6, Connection, It is capable of rs232c communications
31
[Preparations]
Preparations
CN X6
Back Plane of Connector for RS232C
Refer to "Optional
Parts" of dedicated
connecting cables.
Insert or pull out a connector
only after cutting power off
both personal computer and driver.
Tighten stop screws firmly.
x
5
x
6
STATUS
ALM CODE
Connection
Wiring of Connector CN X6 (Connection with Personal Computer/Console)
• It is capable of RS232C communications.
For RS232C communications only
1) Connect the personal computer and driver 1:1 through RS-232C, and use “PANATERM
®
” (optional component),
the setup supporting software. Running “PANATERM
®
” on your personal computer, you can have convenient
functions with excellent operability, such as various types of monitors, parameter settings/changes, waveform
graphic displays, etc.
2) You can connect a host (personal computer, or host controller) and driver through RS 232C for communications.
For detailed information, refer to “Communications” on Page 158 of Reference edition.
Connection with Console
x
5
x
6
STATUS
ALM CODE
MOD
E
SHIF
T
SET
S
M
Connect to CN X6.