Panasonic MINAS E-series - Manual (Page 22)

22
Installation
Console
Location
(1) Indoors, where the driver is not subjected to rain water and direct sun beams. The console is not water-
resistant.
(2) The place where the driver is not exposed to corrosive atmospheres such as hydrogen sulfide, sulfurous acid,
chlorine, ammonia, sulfur, chlorine gas, sulfuric gas, acid, alkali, salt, etc. and is free from splash of flammable
gas, grinding coolant, oil mist, iron powder, chips, etc.
(3) Place in a well-ventilated, and humid-and dust-free space.
(4) Place in a space to be easily accessed for inspection and cleaning.
Environmental Conditions
• Avoid strong physical shock to the product.
• Do not drop the product.
• Do not pull the cable with an excessive force.
• Do not set the product near a heat generating device such as heater and large wire wound resistor.
Method of Connection
• Securely connect the console connector to the connector CN X6 of the driver.
• Never connect or disconnect the connector by grabbing the connector cable.
Item
Ambient temperature
Ambient humidity
Storage temperature
Storage humidity
Vibration
Shock
Altitude
Conditions
0 to 55
°C (free from freezing)
Lower than 90%RH (free from condensation)
-20 to 70
°C (free from freezing)
Lower than 90%RH (free from condensation)
Lower than 5.9 m/s 2 (0.6G) at 10 to 60 Hz
Compliant with free-fall test JIS C 0044 (1-m fall with a fall guide, twice in each direction)
Lower than 1000 m
x 1
x 3
x 4
x 5
x 6
STATUS ALM CODE
MOD E SHIF T SET S
M
Connect to CN X6.