Before use, Mounting direction and space requirements – Panasonic MINAS E-series User Manual
Page 19
19
[Before Use]
Before Use
Mounting Direction and Space Requirements
• Allow enough space to ensure enough cooling.
• Install fans to provide a uniform distribution of temperature in the control box.
• Observe the environmental requirements for the control box, mentioned in the previous page.
This driver has a cooling fan in its bottom and a mounting face.
To install the driver, ensure that there is enough space around the inlet and outlet ports so as not to prevent
intake and exhaust of the fans.
x
1
x
3
x
4
x
5
x
6
STATUS
ALM CODE
x
1
x
3
x
4
x
5
x
6
STATUS
ALM CODE
x
1
x
3
x
4
x
5
x
6
STATUS
ALM CODE
x
1
x
3
x
4
x
5
x
6
STATUS
ALM CODE
Fan
Driver Exhaust
Direction
Fan
Driver Exhaust
Direction
Driver Exhaust
Direction
Driver Exhaust
Direction
Driver Intake
Direction
Driver Intake
Direction
Driver Intake
Direction
Driver Intake
Direction
min.
100 mm
min.
40 mm
min.
40 mm
min.
10 mm
min.
10 mm
min.
10 mm
min.
100 mm
Part where DIN
rail is mounted
DIN rail
With rail stop
pushed in
Hook the upper side of DIN rail
mounting part on the DIN rail.
With the rail stop released, pull out the
lower part of the driver to the near side.
By lifting the driver, you can remove it
from the DIN rail.
Pull out the lower part
of the driver to the
near side.
Press lightly the lower part of
the main body of driver.
Press lightly.
Ensure that the rail stop
has been pushed in.
Driver mounted to DIN rail
(4) Removing from DIN Rail