Avago Technologies Cache Protection for RAID Controller Cards User Manual
Avago Technologies Hardware
Table of contents
Document Outline
- Cache Backup Products for MegaRAID SAS+SATA RAID Controllers User Guide
- Chapter 1: Introduction
- Chapter 2: Installing the Cache Backup Products
- 2.1 Installing the LSIiBBU01 Unit
- 2.2 Installing the LSIiBBU05 Unit
- 2.2.1 Installing the LSIiBB05 (NiMH) Unit
- 2.2.1.1 Top View and Bottom View of the LSIiBB05 NiMH Unit
- 2.2.1.2 Connecting the LSIiBB05 NiMH Unit Directly to the RAID Controller
- 2.2.1.3 Removing the RAID Controller from the Host Computer
- 2.2.1.4 Installing the LSIiBB05 NiMH Unit on the RAID Controller
- 2.2.1.5 Reinstalling the RAID Controller on the Motherboard
- 2.2.1.6 Connecting the LSIiBB05 NiMH Unit Remotely to the RAID Controller
- 2.2.2 Installing the LSIiBBU05 (LiON) Unit
- 2.2.2.1 Top View and Bottom View of the LSIiBB05 LiON Unit
- 2.2.2.2 Connecting the LSIiBB05 LiON Unit Directly to the RAID Controller
- 2.2.2.3 Removing the RAID Controller from the Host Computer
- 2.2.2.4 Installing the LSIiBB05 LiON Unit Directly on the RAID Controller
- 2.2.2.5 Reinstalling the RAID Controller on the Motherboard
- 2.2.2.6 Connecting the LSIiBB05 LiON Unit Remotely to the RAID Controller
- 2.2.1 Installing the LSIiBB05 (NiMH) Unit
- 2.3 Installing the LSIiBBU06 Unit
- 2.3.1 Top View and Bottom View of the LSIiBBU06 Unit
- 2.3.2 Connecting a LSIiBBU06 Unit Directly to a RAID Controller
- 2.3.3 Connecting the LSIiBBU06 Unit Remotely to the RAID Controller
- 2.3.4 Connecting a Remote LSIiBBU06 Unit to a MegaRAID SAS RAID Controller
- 2.3.5 Connecting a Remote LSIiBBU06 Unit on the System Chassis to a Board-to-Board Adapter Card on a RAID Controller
- 2.3.5.1 Removing the RAID Controller from the Computer
- 2.3.5.2 Installing the Board-to-Board Adapter Card on the RAID Controller
- 2.3.5.3 Connecting the Cable between the Board-to-Board Adapter Card on the RAID Controller and the LSIiBBU06 Unit on the System Chassis
- 2.3.5.4 Reinstalling the RAID Controller
- 2.3.6 Connecting an LSIiBBU06 Unit from a Remote Mount Board to a Board-to-Board Cable Adapter Card on a RAID Controller
- 2.3.6.1 Removing the RAID Controller from the Computer
- 2.3.6.2 Installing the Board-to-Board Cable Adapter Card on the RAID Controller
- 2.3.6.3 Connecting the Cable Between the LSIiBBU06 Unit on the Remote Mount Board and the Board-to-Board Cable Adapter Card on the RAID Controller
- 2.3.6.4 Reinstalling the RAID Controller
- 2.3.6.5 Installing the Remote Mount Board
- 2.4 Installing the LSIiBBU07 Unit
- 2.4.1 Front View and Rear View of the LSIiBBU07 Unit
- 2.4.2 Installing the LSIiBBU07 Unit Directly on a RAID Controller
- 2.4.3 Connecting the LSIiBBU07 Unit Remotely to the MegaRAID SAS RAID Controller
- 2.4.4 Connecting the Remote LSIiBBU07 Unit to the BBU Connector on the RAID Controller
- 2.4.5 Connecting a Remote LSIiBBU07 to a Daughter Card on the RAID Controller
- 2.4.6 Connecting an LSIiBBU07 Unit from a Remote Mount Board to a Board-to-Board Adapter Card on a RAID Controller
- 2.4.6.1 Removing the RAID Controller from the Host Computer
- 2.4.6.2 Installing the Board-to-Board Cable Adapter Card on the RAID Controller
- 2.4.6.3 Connecting the LSIiBBU08 Unit on the Remote Mount Board to the Board-to Board Cable Adapter Card on the RAID Controller
- 2.4.6.4 Reinstalling the RAID Controller
- 2.4.6.5 Installing the Remote Mount Board
- 2.5 Installing the LSIiBBU08 Unit
- 2.5.1 Front View and Rear View of the LSIiBBU08 Unit
- 2.5.2 Installing the LSIiBBU08 Unit Directly on the RAID Controller
- 2.5.3 Connecting the LSIiBBU08 Remotely to the RAID Controller
- 2.5.4 Connecting the Remote LSIiBBU08 Unit to the BBU Connector on the RAID Controller
- 2.5.5 Connecting a Remote LSIiBBU08 Unit on the System Chassis to a Board-to-Board Cable Adapter Card on the RAID Controller
- 2.5.5.1 Removing the RAID Controller from the Host Computer
- 2.5.5.2 Installing the Interposer Card on the Controller
- 2.5.5.3 Connecting the Cable Between the Interposer Card and the LSIiBBU08 Unit
- 2.5.5.4 Reinstalling the Controller in the Host Computer
- 2.5.5.5 Installing the Remote Mount Board in the Host Computer
- 2.5.6 Connecting the LSIiBBU08 Unit on a Remote Mount Board to a Board-to Board Cable Adapter Card on the RAID Controller
- 2.5.6.1 Removing the RAID Controller from the Host Computer
- 2.5.6.2 Installing the Interposer Card on the Controller
- 2.5.6.3 Connecting the Cable Between the LSIiBBU08 Unit on the Remote Mount Board and the Adapter Card on the RAID Controller
- 2.5.6.4 Reinstalling the RAID Controller
- 2.5.6.5 Installing the Remote Mount Board
- 2.6 Installing the LSIiBBU09 Unit
- 2.7 Installing the LSIiTBBU03 Unit
- 2.8 Connecting a CVFM01 Module on a MegaRAID SAS 9260 RAID Controller to a Remote CVPM01 Module
- 2.9 Connecting a CVFM02 Module on a RAID Controller to a CVPM02 Module Mounted on a Remote Mount Board
- 2.9.1 Removing the RAID Controller from the Host Computer
- 2.9.2 Installing the Clip on the Remote Mount Board
- 2.9.3 Attaching the CVPM02 Module to the Clip on the Remote Mount Board
- 2.9.4 Connecting the CVFM02 Module to the Remote CVPM02 Module
- 2.9.5 Reinstalling the MegaRAID SAS 9266-8i RAID Controller on the Motherboard
- 2.9.6 Installing the Remote Mount Board in the System
- 2.10 Attaching the CVFM03 Module to a MegaRAID SAS 9265CV-8i RAID Controller and Connecting to a Remote CVPM02 Module
- 2.10.1 Top View and Bottom View of the CVFM03 Module
- 2.10.2 Installing the CVFM03 Module Directly on the MegaRAID SAS 9265CV-8i RAID Controller
- 2.10.3 Installing the Clip Directly on the Remote Mount Board
- 2.10.4 Attaching the CVPM02 Module to the Clip on the Remote Mount Board
- 2.10.5 Connecting the CVFM03 Module to the Remote CVPM02 Module
- 2.10.6 Reinstalling the RAID Controller on the Motherboard
- 2.10.7 Installing the Remote Mount Board in the System
- 2.11 Attaching the CVFM04 Module to the RAID Controller and by Cable to a CVPM02 Module on a Remote Mount Board
- 2.11.1 Front View and Back View of the CVFM04 Module
- 2.11.2 Attaching the CVFM04 Module on the MegaRAID SAS 9361 RAID Controller and Connecting by Cable to the Remote CVPM02 Module
- 2.11.2.1 Removing the RAID Controller from the Computer
- 2.11.2.2 Attaching the CVFM04 Module Directly to the RAID Controller
- 2.11.2.3 Installing the Clip on the Remote Mount Board
- 2.11.2.4 Attaching the CVPM02 Module to the Clip
- 2.11.2.5 Connecting the CVFM04 Module to the Remote CVPM02 Module
- 2.11.2.6 Reinstalling the RAID Controller on the Motherboard
- 2.11.2.7 Installing the Remote Mount Board on the Motherboard
- Chapter 3: Monitoring and Managing Battery Backup Units and CacheVault Modules
- 3.1 Monitoring and Managing BBU Units with the MegaRAID Configuration Utilities
- 3.1.1 Monitoring and Managing BBU Units with the WebBIOS Configuration Utility
- 3.1.2 Monitoring and Managing BBU Units with the Ctrl-R Utility
- 3.1.3 Monitoring and Managing BBU Units with the MegaCLI Configuration Utility
- 3.1.3.1 Display BBU Unit Information
- 3.1.3.2 Display BBU Status Information
- 3.1.3.3 Display BBU Capacity
- 3.1.3.4 Display BBU Design Parameters
- 3.1.3.5 Display Current BBU Properties
- 3.1.3.6 Start BBU Learning Cycle
- 3.1.3.7 Place Battery in Low-Power Storage Mode
- 3.1.3.8 Set BBU Properties
- 3.1.3.9 Seal the Gas Gauge EEPROM Write Access
- 3.1.4 Monitoring and Managing BBU Units with the StorCLI Configuration Utility
- 3.1.5 Monitoring and Managing BBU Units with the MegaRAID Storage Manager Configuration Utility
- 3.1.6 Monitoring and Managing BBU Units with the HII Configuration Utility
- 3.2 Replacing Battery Backup Units
- 3.3 Disposing of Battery Backup Units
- 3.4 Transferring Cached Data from a Failed Controller
- 3.5 Monitoring CacheVault Module Information
- 3.1 Monitoring and Managing BBU Units with the MegaRAID Configuration Utilities
- Chapter 4: Battery Backup Unit and CacheVault Specifications
- Battery Glossary
- Revision History