Avago Technologies Cache Protection for RAID Controller Cards - Manual (Page 81)

Avago Technologies
- 81 -
Cache Backup Products for MegaRAID SAS+SATA RAID Controllers User Guide
May 2015 Chapter 2: Installing the Cache Backup Products
Installing the LSIiBBU09 Unit
2.6.3 Connecting a Remote LSIiBBU09 Unit on the System Chassis to a RCM01 Module on a RAID
Controller
The procedures in this section show how to connect a remote LSIiBBU09 unit on the system chassis to a RCM01
module that is installed on the MegaRAID SAS 9265-8i RAID controller. You can connect the LSIiBBU09 unit in the
same way to the MegaRAID SAS 9285-8e RAID controller and the MegaRAID SAS 9286-8e RAID controller
To connect a remote LSIiBBU09 unit to your RAID controller, perform the following tasks in order.
1. Remove the RAID controller from the host computer. See Section 2.6.3.2, Removing the RAID Controller from the
Host Computer , on page 82 .
2. Connect the cable between the RCM01 module and the remote LSIiBBU09 unit. See Section 2.6.3.3, Connecting
the Cable between the RCM01 Module and the Remote LSIiBBU09 Unit , on page 83 .
3. Reinstall the RAID controller in the host computer. See Section 2.6.3.4, Reinstalling the RAID Controller in the Host
Computer , on page 84 .
NOTE Because server and workstation chassis vary from vendor to vendor,
no standard mounting option exists that is compatible with the
various system configurations. The LSIiBBU09 battery kit, in
combination with the Remote Battery Kit, includes the battery,
daughtercard, cable, and standoff. This combination enables
authorized resellers and chassis manufacturers to customize the
location of the remote battery to provide the most flexibility within
various environments.