Avago Technologies Cache Protection for RAID Controller Cards - Manual (Page 88)

Avago Technologies
- 88 -
Cache Backup Products for MegaRAID SAS+SATA RAID Controllers User Guide
May 2015 Chapter 2: Installing the Cache Backup Products
Connecting a CVFM01 Module on a MegaRAID SAS 9260 RAID Controller to a Remote
CVPM01 Module
2.8 Connecting a CVFM01 Module on a MegaRAID SAS 9260 RAID Controller to a
Remote CVPM01 Module
You can connect the CVPM01 module on the MegaRAID SAS 9260CV-4i RAID controller or the MegaRAID SAS
9260CV-8i RAID controller to a remote CVPM01 super-capacitor pack. The CVPM01 module provides power to back up
your data in case of power loss.
2.8.1 Top View and Bottom View of the CVFM01 Module
The following figure shows the top view and the bottom view of the CVFM01 module. (The top view is the side that
you can see when the unit is installed on a RAID controller.)
Figure 58 Top View and Bottom View of the CVFM01 Module
NOTE Record your controller serial number in a safe location in case you
need to contact Avago.
85075-02 Top View
Bottom View
Board to Board
Connector
Cable Connector