Figure 40 reinstalling the raid controller, Edge of motherboard edge of motherboard – Avago Technologies Cache Protection for RAID Controller Cards User Manual
Page 65
Avago Technologies
- 65 -
Cache Backup Products for MegaRAID SAS+SATA RAID Controllers User Guide
May 2015
Chapter 2: Installing the Cache Backup Products
Installing the LSIiBBU08 Unit
2.5.4.3
Reinstalling the RAID Controller on the Motherboard
Follow these steps to reinstall the RAID controller on a motherboard.
1.
With the power to the chassis still turned off, and the power cords unplugged, make sure that the chassis is
grounded and has no AC power.
2.
Insert the RAID controller in a PCIe slot on the motherboard, as shown in the following figure.
NOTE
This controller is a PCIe x8 card, and it can operate in x8 or x16 slots.
However, some PCIe slots support only PCIe graphics cards; a
controller installed in one of these slots will not function. Refer to the
guide for your motherboard for information about the PCIe slot.
3.
Press down gently, but firmly, to seat the card correctly in the slot.
Figure 40 Reinstalling the RAID Controller
4.
Secure the controller to the computer chassis with the bracket screw.
5.
Attach the cables from the external port connectors to the drives.
6.
Replace the computer cover, and reattach the power cords.
7.
Turn on the power to the computer.
85065-04
1
2
2
Edge of
Motherboard
Edge of
Motherboard
Model: BA
T 1S1P
WARNING:
The battery
used
in
this
device may
present
a risk
of fire or
chemic
al burn if mistreated.
DO NOT
diss
emble, heat above
60C, crus
h or
puncture,
short
circuit external
contac
ts,
or dispos
e in fire or water
.
WARNING:
The battery
used
in
this
device may
present
a risk
of fire or
chemical burn if mistreated.
DO NOT
dissemble, heat above
60C, crush or
puncture,
short
circuit external
contacts,
or dispose in fire or water
.
Con
tains
:
Son
y US
45
42
61A
8T
Cell
Rech
arg
eabl
e Li-P
oly
me
r
Batt
ery P
ac
k
Ratin
g:
3.7
V;
1.5
9A
h; 5
.9W
h
Fin
ished
in C
hina
Contains:
Sony US454261A8T
Cell
Rechargeable Li-Polymer
Battery Pack
Rating:
3.7V; 1.59Ah; 5.9Wh
Finished in China
BB
U P
/N: L
4-2
534
3-0
4
BBU P/N: L4-25343-04
BB
U S
/N:S
Y02
700
225
SO
BBU S/N:SY02700225SO
Li-io
n
Li-ion
5