Avago Technologies Cache Protection for RAID Controller Cards - Manual (Page 52)

Avago Technologies
- 52 -
Cache Backup Products for MegaRAID SAS+SATA RAID Controllers User Guide
May 2015 Chapter 2: Installing the Cache Backup Products
Installing the LSIiBBU07 Unit
2.4.5.4 Reinstalling the Controller in the Computer
Follow these steps to install the controller in the computer.
1. With the power to the chassis still turned off, and the power cords unplugged, make sure that the chassis is
grounded and has no AC power.
2. Insert the RAID controller in a PCI Express slot on the motherboard, as shown in the following figure.
NOTE Because server and workstation chassis vary from vendor to vendor,
there is no standard mounting option that is compatible with the
various system configurations. Therefore, the LSIiBBU07 battery kit
contains only the battery, daughter card, and standoff, which enables
authorized resellers and chassis manufacturers to customize the
location of the remote battery to provide the most flexibility within
various environments.
3. Press down gently, but firmly, to seat the card correctly in the slot.
Figure 31 Reinstalling the MegaRAID SAS Controller
4. Secure the controller to the computer chassis with the bracket screw.
5. Replace the computer cover and reattach the power cords.
6. Turn on the power to the computer.
Edge of Motherboard
Bracket Screw
Edge of
Motherboard
Press Here
85021-14
Press Here