Yaskawa AC Drive P1000 Bypass Technical Manual - Manual (Page 166)

n Z3-11: Communication Fault Detection Selection
No. Name Setting Range Default
Z3-11 Communication Fault Detection Selection 0 to 1 1
Setting 0: Disabled
Ignore setting in Z3-05.
Setting 1: Enabled
Behavior defined by Z3-05.
u Z4: Ethernet Option Bypass Control
n Z4-01 to Z4-04: IP Address 1 to 4
Sets the network static IP address. Z4-01 is the most significant octet of the network static IP address; Z4-04 is the least
significant.
No. Parameter Name Setting Range Default
Z4-01 IP Address 1
0 to 255
192
Z4-02 IP Address 2 168
Z4-03 IP Address 3 1
Z4-04 IP Address 4 20
n Z4-05 to Z4-08: Subnet Mask 1 to 4
Sets the network static subnet mask. Z4-05 is the most significant octet of the network static subnet mask; Z4-08 is the least
significant.
No. Parameter Name Setting Range Default
Z4-05 Subnet Mask 1
0 to 255
255
Z4-06 Subnet Mask 2 255
Z4-07 Subnet Mask 3 255
Z4-08 Subnet Mask 4 0
n Z4-09 to Z4-12: Gateway Address 1 to 4
Sets the network gateway address. Z4-09 is the most significant octet of the network gateway address; Z4-12 is the least
significant.
No. Parameter Name Setting Range Default
Z4-09 Gateway Address 1
0 to 255
192
Z4-10 Gateway Address 2 168
Z4-11 Gateway Address 3 1
Z4-12 Gateway Address 4 1
n Z4-13: Address Startup Mode
Selects the option address setting method.
No. Name Setting Range Default
Z4-13 Address Startup Mode 0 to 2 2
Setting 0: User-Defined (Static IP)
Setting 1: BOOTP
Setting 2: DHCP
n Z4-14: Duplex Mode Setting
No. Name Setting Range Default
Z4-14 Duplex Mode Setting 0 to 2 1
5.13 Z: Bypass Parameters
166 YASKAWA SIEP YAIP1B 01A YASKAWA AC Drive – P1000 Bypass Technical Manual