Yaskawa AC Drive P1000 Bypass Technical Manual - Manual (Page 112)

Predefined V/f Patterns for Models D273 to D396 and B124 to B590
The voltage values in the graphs for settings 0 to E apply to applications with 200 V motors. Double the voltage values for
400 V motors. The voltage values in settings 0 to E do not apply to 208, 230, or 460 V motor applications.
Table 5.18 Rated Torque Characteristics, Settings 0 to 3
Setting = 0 50 Hz Setting = 1 60 Hz Setting = 2 60 Hz Setting = 3 72 Hz
0
6
200
1.3 2.5 50
12
V
oltage (V)
Frequency (Hz)
0
6
200
1.5 3 60
12
V
oltage (V)
Frequency (Hz)
0
6
12
200
1.5 3 60 50
V
oltage (V)
Frequency (Hz)
0
6
12
200
1.5 3 72 60
V
oltage (V)
Frequency (Hz)
Table 5.19 Variable Torque Characteristics, Settings 4 to 7
Setting = 4 50 Hz Setting = 5 50 Hz Setting = 6 60 Hz Setting = 7 60 Hz
0
5
200
1.3 25 50
35
V
oltage (V)
Frequency (Hz)
0
6
200
1.3 25 50
50
V
oltage (V)
Frequency (Hz)
0
5
200
1.5 30 60
35 V
oltage (V)
Frequency (Hz)
0
6
200
1.5 30 60
50 V
oltage (V)
Frequency (Hz)
Table 5.20 High Starting Torque, Settings 8 to B
Setting = 8 50 Hz Setting = 9 50 Hz Setting = A 60 Hz Setting = B 60 Hz
0
7
200
1.3 2.5 50
15 V
oltage (V)
Frequency (Hz)
0
9
200
1.3 2.5 50
20
V
oltage (V)
Frequency (Hz)
0
7
200
1.5 3 60
15 V
oltage (V)
Frequency (Hz)
0
11
200
1.5 3 60
20
V
oltage (V)
Frequency (Hz)
Table 5.21 Constant Output, Settings C to F
Setting = C 90 Hz Setting = D 120 Hz Setting = E 180 Hz Setting = F 60 Hz
0
6
12
200
1.5 3 90 60
V
oltage (V)
Frequency (Hz)
0
6
12
200
1.5 3 120 60
V
oltage (V)
Frequency (Hz)
0
6
12
200
1.5 3 180 60
V
oltage (V)
Frequency (Hz)
0
6.9
230
1.5 3 60
13.8
V
oltage (V)
Frequency (Hz)
Setting a Custom V/f Pattern (Setting F: Default)
Setting parameter E1-03 to F allows the user to set up a custom V/f pattern by changing parameter E1-05.
n V/f Pattern Settings E1-05
If E1-03 is set to a preset V/f pattern (i.e., a value other than F), the user can monitor the maximum voltage in parameters
E1-05. To create a new V/f pattern, set E1-03 to F.
No. Parameter Name Setting Range Default
E1-05 Maximum Voltage 0.0 to 510.0 V <1> <2>
<1> Values shown are specific to 480 Vac.
<2> Default setting is determined by parameter E1-03, V/f Pattern Selection.
5.5 E: Motor Parameters
112 YASKAWA SIEP YAIP1B 01A YASKAWA AC Drive – P1000 Bypass Technical Manual