Yaskawa D1000 Series Power Regenerative Converter - Manual (Page 73)

3.8 Harmonic Filter Module Wiring
YASKAWA ELECTRIC TOEP C710656 07C YASKAWA Power Regenerative Converter - D1000 Instruction Manual 73
El
ec
tr
ical
I
n
st
al
lat
ion
3
■ Wiring a Harmonic Filter Module
WARNING! Electrical Shock Hazard. Shut off the power supply to the converter before wiring the main circuit terminals. Failure to
comply may result in death or serious injury.
1. Loosen the screws on the faceplate and top cover and remove the faceplate and top cover.
Note: 1. The face plate and top cover can be removed by loosening these screws; they do not need to be removed.
2. EUJ71080, EUJ71081, EUJ71088, EUJ71089 have no screws on terminal covers.
Figure 3.33
Figure 3.30 Removing the Covers
2. Wire the r, , and t terminals.
Figure 3.34
Figure 3.31 Wiring the r, , and t Terminals
A – Faceplate C – Top cover
B – Terminal cover
EUJ71082 to EUJ71087 ,
EUJ71090 to EUJ71096
A
C
EUJ71080 , EUJ71081 ,
EUJ71088 , EUJ71089
A
B
D1000
r t
EUJ71082 to EUJ71087 ,
EUJ71090 to EUJ71096 EUJ71080 , EUJ71081 ,
EUJ71088 , EUJ71089 D1000
TOEP_C710656_07C_2_0.book 73 ページ ２０１５年１月９日 金曜日 午後６時２３分