Yaskawa D1000 Series Power Regenerative Converter - Manual (Page 147)

6.4 Cooling Fans
YASKAWA ELECTRIC TOEP C710656 07C YASKAWA Power Regenerative Converter - D1000 Instruction Manual 147
Per
iodic Ins
pec
tion
&
Maint
ena
nc
e
6
■ 2A0050 to 2A0130, 4A0130, 4A0185
Removing and Disassembling the Cooling Fan Unit
1. Remove the terminal cover and front cover. Refer to Terminal Cover on page 57 for details.
2. Remove the fan connector (CN6). Remove the fan connectors (CN6, CN7) in models 2A0130, 4A0130, and
4A0185.
Figure 6.13
Figure 6.13 Cooling Fan Replacement: Fan Unit and Connectors
3. Remove the screws holding the fan unit in place and slide the fan unit out of the converter.
Figure 6.14
Figure 6.14 Remove the Fan Unit
A – Fan unit D – Circulation fan relay cable
B – Fan relay cable E – Fan connector (CN7)
C – Fan connector (CN6)
A A
B
C
C
A
B
D
E C
B
2A0065, 2A0090 2A0130, 4A0130, 4A0185 2A0050, 4A0060, 4A0100
TOEP_C710656_07C_2_0.book 147 ページ ２０１５年１月９日 金曜日 午後６時２３分