Minor, Minor faults and alarms – Yaskawa D1000 Series Power Regenerative Converter User Manual

Page 107

5.2 Alarms, Faults, and Errors

YASKAWA ELECTRIC TOEP C710656 07C YASKAWA Power Regenerative Converter - D1000 Instruction Manual

107

blesh

oot

ing

■

Minor Faults and Alarms

Refer to

Table 5.3

for an overview of possible alarm codes. Conditions such as overvoltages can trip faults and alarms. It

is important to distinguish between faults and alarms to determine the proper corrective actions. When the converter
detects an alarm, the ALM indicator LED blinks and the alarm code display flashes. Most alarms trigger a digital output
programmed for alarm output (H2- = 10). A fault (not an alarm) is present if the ALM LED lights without blinking.
Refer to

Faults on page 106

for information on fault codes.

Table 5.3 Minor Fault and Alarm Displays

<1> Displayed as CPF00 when occurring at converter power up. When one of the faults occurs after successfully starting the converter, the display

will show CPF01. Displayed as CPF20 when occurring at converter power up. When one of the faults occurs after successfully starting the

converter, the display will show CPF21.

Digital Operator Display

Name

Minor Fault Output

(H2- = 10)

Page

LED