Yaskawa D1000 Series Power Regenerative Converter - Manual (Page 212)

C.4 MEMOBUS/Modbus Setup Parameters
212 YASKAWA ELECTRIC TOEP C710656 07C YASKAWA Power Regenerative Converter - D1000 Instruction Manual
■ H5-11: Communications Enter Function Selection
Selects whether an Enter command is necessary to change parameter values via MEMOBUS/Modbus communications.
Refer to
Enter Command on page 229 .
Setting 0: Enter command necessary
Parameter changes become effective after an Enter command. An Enter command must only be sent after the last
parameter change, not for each single parameter.
Setting 1: Enter command not necessary
Parameter value changes become effective immediately without the need to send an Enter command.
No. Name Setting Range Default
H5-11 Communications Enter Function Selection 0 or 1 1
TOEP_C710656_07C_2_0.book 212 ページ ２０１５年１月９日 金曜日 午後６時２３分