Yaskawa D1000 Series Power Regenerative Converter - Manual (Page 101)

4.6 Verifying Parameter Settings and Backing Up Changes
YASKAWA ELECTRIC TOEP C710656 07C YASKAWA Power Regenerative Converter - D1000 Instruction Manual 101
S
ta
rt
-Up Pr
ogr
amming
&
O
p
er
at
io
n
4
■ Copying Procedure for the LCD Operator
The LCD operator can perform the following operations by changing the o3-01(Copy Function Selection) parameter in
the converter.
Read (o3-01 = 1)
Copies all parameters from the converter to the LCD operator.
Note: There is a limit to the number of read operations that you can perform from the LCD operator. As a guide, do not perform more
than 100,000 read operations.
Copy (o3-01 = 2)
Copies all parameters from the LCD operator to the converter.
Verify (o3-01 = 3)
Compares the parameters in the converter with the parameter settings saved on the LCD operator for matches.
TOEP_C710656_07C_2_0.book 101 ページ ２０１５年１月９日 金曜日 午後６時２３分