Yaskawa D1000 Series Power Regenerative Converter - Manual (Page 149)

6.4 Cooling Fans
YASKAWA ELECTRIC TOEP C710656 07C YASKAWA Power Regenerative Converter - D1000 Instruction Manual 149
Per
iodic Ins
pec
tion
&
Maint
ena
nc
e
6
Cooling Fan Wiring: 2A0065 to 2A0090
1. Position the protective tube so the fan connector sits in the center of the protective tube.
2. Screw down the fan finger guards and the cooling fans to the fan unit base.
3. Place the connectors between the clamping band bases and the hooks.
Figure 6.17
Figure 6.17 Cooling Fan Wiring: 2A0065, 2A0090
4. Double-check the relay connector to ensure it is properly connected.
5. Reattach the cable cover to its original position and tighten the screws so the fan guard holds the cable cover in
place.
Note: Do not pinch the fan cable between parts when reassembling the fan unit.
Figure 6.18
Figure 6.18 Reattaching the cable cover: 2A0065, 2A0090
Cooling Fan Wiring: 2A0130, 4A0130, 4A0185
1. Position the protective tube so the fan connector sits in the center of the protective tube.
2. In the space between fans 1 and 2, place the fan connector for fan B2 in front of the fan connector for fan B1.
Protective tube 次回用
Hook
Lock tie Relay connector for fan B1 and B2 Relay connector for fan B3
Hook
D1000
Fan B1
Fan B2
Cable cover
Fan B3 D1000
Protective tube
TOEP_C710656_07C_2_0.book 149 ページ ２０１５年１月９日 金曜日 午後６時２３分