Yaskawa iQpump1000 AC Drive Quick Start - Manual (Page 22)

i.1 Preface
Yaskawa manufactures products used as components in a wide variety of industrial systems and equipment. The selection and
application of Yaskawa products remain the responsibility of the equipment manufacturer or end user. Yaskawa accepts no
responsibility for the way its products are incorporated into the final system design. Under no circumstances should any
Yaskawa product be incorporated into any product or design as the exclusive or sole safety control. Without exception, all
controls should be designed to detect faults dynamically and fail safely under all circumstances. All systems or equipment
designed to incorporate a product manufactured by Yaskawa must be supplied to the end user with appropriate warnings and
instructions as to the safe use and operation of that part. Any warnings provided by Yaskawa must be promptly provided to
the end user. Yaskawa offers an express warranty only as to the quality of its products in conforming to standards and
specifications published in the Yaskawa manual. NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS OFFERED.
Yaskawa assumes no liability for any personal injury, property damage, losses, or claims arising from misapplication of its
products.
This manual is designed to ensure correct and suitable application of drives. Read this manual before attempting to install,
operate, maintain, or inspect a drive and keep it in a safe, convenient location for future reference. Be sure you understand all
precautions and safety information before attempting application.
u Applicable Documentation
The following manuals are available for iQpump1000 drives:
F2 F1
ESC M M
AUTO OFF
ENTER RESET
ALM DIGITAL OPERATOR JVOP-183
HAND
iQpump1000 AC Drive Quick Start Guide (TOEPYAIP1W01)
Read this guide first. This guide is packaged together with the product and contains basic information required to install and
wire the drive. It also gives an overview of fault diagnostics, maintenance, and parameter settings. The purpose of this guide
is to prepare the drive for a trial run with an application and for basic operation. This manual is available for download on
our documentation website, www.yaskawa.com.
iQpump1000 AC Drive Technical Manual (SIEPYAIP1W01)
This manual provides detailed information on parameter settings, drive functions, and MEMOBUS/Modbus specifications.
Use this manual to expand drive functionality and to take advantage of higher performance features. This manual is available
for download on our documentation website, www.yaskawa.com.
iQpump1000 Simplex Quick Start Procedure (TM.iQp1000.01)
This sheet is packaged together with the drive and contains a step-by-step guide to enable the user to properly wire the drive
and motor. It also describes simplex pump application configuration.
u Symbols
Note: Indicates a supplement or precaution that does not cause drive damage.
TERMS TERMS
Indicates a term or definition used in this manual.
u Terms and Abbreviations
• Drive: Yaskawa iQpump1000 Intelligent Pump Controller
• BCD: Binary Coded Decimal
• H: Hexadecimal Number Format
• IGBT: Insulated Gate Bipolar Transistor
• kbps: Kilobits per Second
• MAC: Media Access Control
• Drive: Yaskawa iQpump1000 Intelligent Pump Controller
• BCD: Binary Coded Decimal
• Mbps: Megabits per Second
• r/min: Revolutions per Minute
• V/f: V/f Control
• OLV: Open Loop Vector Control
u Trademarks
• BACnet is a trademark of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE).
• CANopen is a trademark of CAN in Automation (CiA).
i.1 Preface
22 YASKAWA TOEP YAIP1W 01B YASKAWA AC Drive - iQpump1000 Quick Start Guide