Yaskawa Yasnac PC NC - Manual (Page 96)

YASNAC PC NC Operating Manual Chapter 3: HMI Process Operation
3 - 44
The Copy button is used to make a copy of the file selected in the first (Source) tab, and
place that copy in the directory specified in the second (Destination) tab. This button is
disabled if no file is selected in the source directory. A Confirm File Replace dialog pops
if performing the copy will overwrite an existing program. It is possible to copy multiple pro-
grams all at once.
Note: The Copy, Move and Duplicate functions all check for available disk space. New files are
not allowed if less than 1024 bytes are available on the destination drive. Rename, Delete, Move,
Copy and Duplicate are disabled if Edit Lock is on.
There are several parameters that control whether macro programs (programs in the 8000 and
9000 ranges) can be displayed or edited. These parameters are listed in Table 3.4.1.1 on page 44.
The effects of combining these parameters are outlined in Table 3.4.1.2 on page 44 and
Table 3.4.1.3 on page 44.
Table 3.4.1.1 Macro Lock Parameters
Table 3.4.1.2 Parameters Controlling O8000 - O8999
Table 3.4.1.3 Parameters Controlling O9000 - O9999
Note: An MTB option that controls locking of 9000 range macro programs may affect these
parameters.
Address Bit
pm 20 0 Permits/prohibits display and edit of O8000 - O8999
pm 21 0 Permits/prohibits edit of O8000 - O8999
pm 22 0 Permits/prohibits edit of O9000 - O9999
pm 3004 0 Permits/prohibits display and edit of O9000 - O9999
pm 21 (edit) pm 20 (display) Copy, Rename, Delete,
Edit, Duplicate, Move
View
permitted permitted yes yes
permitted prohibited no no
prohibited permitted no yes
prohibited prohibited no no
pm 22 (edit) pm 3004 (display) Copy, Rename, Delete,
Edit, Duplicate, Move
View
permitted permitted yes yes
permitted prohibited no no
prohibited permitted no yes
prohibited prohibited no no