H3C Technologies H3C Intelligent Management Center - Manual (Page 48)

32
• Check Type—Check type of the PC software control group. The check type options vary with the PC
software control types, as shown in Table 15 .
• Server Address—IPv4 address of a file server from which access users can download the required
software, update files, and repair tools.
• IPv6 Server Address—IPv6 address of a file server from which access users can download the
required software, update files, and repair tools.
• Failure Notification—Message that the iNode client displays when an access user fails the PC
software control group check.
When an access user fails the PC software control group check, EAD sends the IPv4 address of the
server to a user using IPv4 address, or the IPv6 address of the server to a user using IPv6 address.
Operators can configure a file server, HTTP server, or FTP server to provide the download services.
Table 15 PC software control groups and check types
Group type Check types
Software
• Installed Forbidden—Prohibits any software products in the control group
from being installed on the user endpoint.
• Installed Required—Requires all software products in the control group to be
installed on the user endpoint.
• Installed Allowed—Allows only the software products in the control group to
be installed on the user endpoint. Only one control group can be set as
Installed Allowed.
Process
• Running Forbidden—Prohibits any processes in the control group from
running on the user endpoint.
• Running Required—Requires all processes in the control group to be running
on the user endpoint.
Service
• Started Forbidden—Prohibits any services in the control group from being
started on the user endpoint.
• Started Required—Requires all services in the control group to be started on
the user endpoint.
File
• Non-Existent—Prohibits any files in the control group from being stored on
the user endpoint.
• Existent—Requires all files in the control group to exist on the user endpoint.
Patch Software Control area
The patch management software control check takes effect only on Linux and Mac OS PCs.
• Check Patch Software—Indicates whether to check the patch software on the user endpoint.
• Failure Notification—Message that the iNode client displays when an access user fails the patch
software check. This parameter appears only when the Check Patch Software option is selected.
Windows Patch Control area
This area has the following option:
• Check Windows Patches—Indicates whether to check the Windows patches on the user endpoint.
The following methods appear only when the Check Windows Patches option is selected:
• Check Through Microsoft Server—Enables the iNode client to check for missing patches and patch
severity levels by connecting to the Microsoft WSUS or SMS server. Patches are then downloaded
and installed automatically.