H3C Technologies H3C Intelligent Management Center - Manual (Page 218)

202
Asset software change information list contents
• Asset Number—Number of the asset. Click the asset number to view detailed information about the
asset.
• Asset Name—Name of the asset.
• Change Type—Change type of the asset software. Options are:
{
Common Update
{
Reinstall OS
{
Other Update
• Change Contents—Content of the changed software. Options are:
{
Login Name
{
Computer Name
{
Logical Disk
{
Operating System
{
Screen Saver
{
Partition
{
Network Connections
{
Software
• Owner—Owner of the asset. Click the owner to view detailed information.
• Changed on—System time of the server when the asset software was changed.
• Details—Click the Details icon to view detailed information about the asset software change.
Asset software change record details
The asset software change record details page has the following parameters:
• Login Name Change Information—Appears only when the computer login name has changed.
Operators can view computer login name change by comparing the new list with the old list.
• Computer Name Change Information—Appears only when the computer name has changed.
Operators can view computer name change by comparing the new list with the old list.
• Logical Disk Change Information—Appears only when the logical disk name, description, file
system, serial number, or total size has changed. Operators can view logical disk change by
comparing the new list with the old list.
• Network Connection Change Information—Appears only when the NIC serial number, IP address,
DHCP status, gateway IP address, MAC address, or subnet mask has changed.
Make sure that the DAM service parameter Report Network Connection Changes is configured as
Yes. Operators can view network configuration changes by comparing the new list with the old
list.
• Operating System Change Information—Appears only when the operating system name, version,
service pack, installation time, or language has changed. Operators can view asset OS changes by
comparing the new list with the old list.
• Screen Saver Change Information—Appears only when the status of the screen saver (enable or
disable), display of logon screen on resume (enabled or disabled), or the idle time length has