H3C Technologies H3C Intelligent Management Center - Manual (Page 172)

156
Screen Saver Information area
• Screen Saver—Indicates whether the screen saver is enabled for the asset.
• Display Logon Screen on Resume—Indicates whether password protection is enabled for the screen
saver.
• Idle Timeout—Maximum idle time, in seconds, before the asset enters the screen-saver state.
Network Connection List area
• Enable DHCP—Indicates whether the network connection can obtain an IP address from a DHCP
server.
• IP Address—IP address of the network connection.
• MAC Address—MAC address of the network connection.
• Gateway IP Address—Gateway IP address of the network connection.
• Subnet Address—Subnet address of the network connection.
• DHCP Server Address—IP address of the DHCP server that assigns IP addresses to the network
connection.
• DNS Server Address—IP address of the DNS server that is used by the network connection. If the
network connection obtains the IP address from a DHCP server, this address is typically also
assigned by that DHCP server.
Partition List area
• Hard Disk Number—Number of the hard disk on the partition. The combination of a partition
number and a hard disk number uniquely identifies a partition on an asset.
• Partition Number—Number of the partition.
• Partition Type—Type of the partition.
• Boot Partition—Indicates whether the partition is the boot partition.
• Size—Size of the partition, in GB.
Logical Disk List area
• Name—Name of the logical disk.
• Description—Volume label of the logical disk and DVD/CD-ROM. When the logical disk has no
volume label, this field displays Local Disk.
• File System—File system of the logical disk.
• SN—Serial number assigned to the logical disk by the operating system.
• Total Size—Total size of the logical disk, in GB. The total size of a logical disk is the sum of free
space plus used space.
Software List area
• Software Name—Name of the software.
• Software Version—The software version.
• Installed on—Date on which the software was installed on the asset.
Patch List area
• Software Name—Name of the software for which the patch is installed. A single software product
might have multiple patches installed.
• Software Version—The software version for which the patch is installed.