H3C Technologies H3C S12500 Series Switches - Manual (Page 89)

77
[Sysname] quit
# Examine the storage space for space insufficiency and delete unused files for more free space.
dir
Directory of flash:/
0 drw- - Dec 07 2005 10:00:57 filename
1 drw- - Jan 02 2006 14:27:51 logfile
2 -rw- 1216 Jan 02 2006 14:28:59 config.cfg
3 -rw- 1216 Jan 02 2006 16:27:26 back.cfg
4 drw- - Jan 02 2006 15:20:21 ftp
129794 KB total (127263 KB free)
delete /unreserved flash:/back.cfg
2. Configure the PC (FTP client):
# Log in to the FTP server through FTP.
c:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User(1.1.1.1:(none)):abc
331 Password required for abc.
Password:
230 User logged in.
ftp> put aaa.bin bbb.bin
# Download the configuration file config.cfg of the device to the PC for backup.
ftp> get config.cfg back-config.cfg
# Upload the configuration file newest.bin to Device.
ftp> put newest.bin
200 Port command okay.
150 Opening ASCII mode data connection for /newest.bin.
226 Transfer complete.
ftp> bye
221 Server closing.
c:\>
NOTE:
•
This FTP procedure also applies to upgrading configuration files.
• After you finish transferring the Boot ROM image through FTP, execute the bootrom upgrade
command to upgrade the BootROM.
3. Upgrade Device:
# Copy newest.bin to the root directory of the memory on the standby MPU in slot 1.
copy newest.bin slot1#flash:/
# Specify newest.bin as the main system software image file for the next startup:
{
For the active MPU.
boot-loader file newest.bin slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y