H3C Technologies H3C S12500 Series Switches - Manual (Page 81)

69
Task Command Remarks
Set the file transfer mode to
binary.
binary By default, ASCII mode is used.
Set the data transmission mode
to passive.
passive Passive by default.
Display the local working
directory of the FTP client.
lcd N/A
Upload a file to the FTP server. put localfile [ remotefile ] N/A
Download a file from the FTP
server.
get remotefile [ localfile ] N/A
Switching to another user account
After you log in to the FTP server with one user account, you can switch to another user account to get a
different privilege without reestablishing the FTP connection. You must correctly enter the new username
and password. A wrong username or password can cause the FTP connection to disconnect.
To switch to another user account:
Task Command
Change the username after FTP login. user username [ password ]
Maintaining and troubleshooting an FTP connection
After a device serving as the FTP client has established a connection with the FTP server, you can perform
the following operations to locate and diagnose FTP connection problems. For more information about
establishing an FTP connection, see "
Establishing an FTP connection ."
To maintain or debug an FTP connection:
Task Command Remarks
Display the help information of
FTP-related commands supported by the
remote FTP server.
remotehelp [ protocol-command ] N/A
Enable information display in a detailed
manner.
verbose
By default, the function is
enabled.
Enable FTP related debugging when the
device acts as the FTP client.
debugging
By default, the function is
disabled.
Terminating an FTP connection
To terminate an FTP connection, perform one of the following tasks: