H3C Technologies H3C S12500 Series Switches - Manual (Page 106)

94
Setting the file system operation mode
The device supports the following file system operation modes:
• alert—The system prompts for confirmation when your operation might cause problems such as file
corruption and data loss. This mode provides an opportunity to cancel a disruptive operation.
• quiet—The system does not prompt for confirmation.
To set the file system operation mode:
Step Command Remarks
1. Enter system view. system-view N/A
2. Set the file system operation
mode.
file prompt { alert | quiet }
Optional.
The default is alert.
File and directory management examples
# Display the files and the subdirectories in the current directory.
dir
Directory of flash:/
0 drw- - Feb 16 2006 11:45:36 logfile
1 -rw- 1218 Feb 16 2006 11:46:19 config.cfg
2 drw- - Feb 16 2006 15:20:27 test
3 -rw- 184108 Feb 16 2006 15:30:20 aaa.bin
129794 KB total (112775 KB free)
# Create a new folder called mytest in the test directory.
cd test
mkdir mytest
%Created dir flash:/test/mytest.
# Display the current working directory.
pwd
flash:/test
# Display the files and the subdirectories in the test directory.
dir
Directory of flash:/test/
0 drw- - Feb 16 2006 15:28:14 mytest
2540 KB total (2519 KB free)
# Return to the upper directory.
cd ..
# Display the current working directory.
pwd