H3C Technologies H3C S12500 Series Switches - Manual (Page 229)

217
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 0
===================================================
|Note:the operating device is cfa0 |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 0
======================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> BootWare Operation Menu |
|<7> Clear Super Password |
|<8> Storage Device Operation |
|<9> Product Special Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Enter EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9):
6. Enter 0 to reboot the device with the new BootWare.
Enter your choice(0-9): 0
DDR2 SDRAM test successful.
Press Ctrl+T to start five-step full RAM test...
Press Ctrl+Y to start nine-step full RAM test...
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing................
Done!
****************************************************************************
* *
* H3C S12500 BootWare, Version 1.22 *
* *
****************************************************************************
Copyright (c) 2004-2012 Hangzhou H3C Technologies Co., Ltd.