H3C Technologies H3C S12500 Series Switches User Manual
Page 214
202
Field Description
'-' = Go to previous field
Press the hyphen (-), and then press Enter to return to the previous
field.
Ctrl+D = Quit
Press Ctrl + D to exit the Ethernet parameter settings menu.
Protocol (FTP or TFTP)
Set the file transfer protocol to FTP or TFTP.
Load File Name
Set the name of the file to be downloaded.
Target File Name
Set a file name for saving the file in the current storage medium on
the device.
By default, the target file name is the same as the source file name.
Server IP Address
Set the IP address of the FTP or TFTP server. If a mask must be set,
use a colon (:) to separate the mask length from the IP address. For
example, 192.168.2.26:24.
Local IP Address
Set the IP address of the device.
Gateway IP Address
Set a gateway IP address if the device is on a different network
than the server.
FTP User Name
Set the username for accessing the FTP server. This username must
be the same as configured on the FTP server. This field is not
available for TFTP.
FTP User Password
Set the password for accessing the FTP server. This password must
be the same as configured on the FTP server. This field is not
available for TFTP.
3.
Choose an option from 1 to 5. For example, to upgrade the main system software image, enter 2.
==========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Update User Private File |
|<6> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|
==========================================================================
Enter your choice(0-6):2
Waiting ...CCC
Download successfully!
47979456 bytes downloaded!
Updating File cfa0:/test.bin..............................................
..........................................................................
..........................................................................
...............................................
..Done!
4.
Enter 0 in the Serial submenu to return to the EXTEND-BOOTWARE menu.
5.
Enter 1 in the EXTEND-BOOTWARE menu to run the new system software.
- H3C S12500-X Series Switches H3C S9800 Series Switches H3C S9500E Series Switches H3C S5560 Series Switches H3C S5130 Series Switches H3C S5120 Series Switches H3C SR8800 H3C SR6600-X H3C SR6600 H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C WX3000E Series Wireless Switches H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points H3C SecPath F5020 H3C SecPath F5040 H3C VMSG VFW1000 H3C S10500 Series Switches