H3C Technologies H3C S12500 Series Switches - Manual (Page 211)

199
Option Tasks
<3> Update Backup Application File
Download a system software image to the
current storage medium as the backup
image (the file attribute is set to B).
If a backup system image already exists on
the storage medium, the B file attribute of
the original image is removed.
<4> Update Secure Application File
Download a system software image to the
current storage medium as the secure
image (the file attribute is set to S).
This option is not supported in the current
release.
<5> Update User Private File
Download a file to the current storage
medium.
This option is not available when
password recovery capability is disabled.
<6> Modify Serial Interface Parameter Change the baud rate of the console port.
<0> Exit To Main Menu Return to the EXTEND-BOOTWARE menu.
NOTE:
To set the current storage medium, see " Managing storage media ."
2. Enter 6 in the serial submenu to change the baud rate.
============================================================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|------------------------------------------------------|
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
==========================================================================
Enter your choice(0-5):5
3. Enter an appropriate baud rate option. For example, enter 5 to set the baud rate to 115200 bps.
H3C recommends that you change the default baud rate (9600 bps) to a higher baud rate for
faster file transfer before downloading a system software image with XMODEM through the
console port.
4. Enter 0 to return to the Serial submenu.
5. Choose an option from 1 to 5. For example, to upgrade the main system software image, enter 2.
=====================================================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |