H3C Technologies H3C S12500 Series Switches - Manual (Page 113)

101
After you change the file directory or file name prefix, or reboot the device, the old configuration archives
are regarded as common configuration files, the configuration archive counter resets, and the display
archive configuration command does not display them. The serial number for new configuration archives
starts from 1.
After the maximum number of configuration archives is reached, the system deletes the oldest archive for
the new archive.
Configuration guidelines
In standalone mode, the configuration archive function saves running configuration only on the active
MPU. In IRF mode, the function saves running configuration only on the active MPU in the master device.
To make sure the system can archive running configuration after an active/standby or
master/subordinate switchover, create the configuration archive directory on all MPUs.
Configuration procedure
To configure configuration archive parameters:
Step Command Remarks
1. Create the configuration
archive directory.
See "Managing the file system."
In standalone mode, create the
directory at least on the active MPU.
In an IRF fabric, create the directory
at least on the active MPU of the
master.
H3C recommends creating the
directory on all MPUs.
2. Enter system view. system-view N/A
3. Configure the directory and
file name prefix for archiving
the running configuration.
archive configuration location
directory filename-prefix
filename-prefix
In standalone mode, do not include
slot information in the directory
name.
In IRF mode, do not include member
ID or slot information in the directory
name.
By default, no path or file name prefix
is set for configuration archives, and
the system does not regularly save
configuration.
IMPORTANT:
The undo form of this command
disables both manual and automatic
configuration archiving, restores the
default settings for the archive
configuration interval and archive
configuration max commands, and
deletes all saved configuration
archives.
4. Set the maximum number of
configuration archives.
archive configuration max
file-number
Optional.
The default number is 5.
Change the setting depending on the
available storage space.