Configuration procedure – H3C Technologies H3C S12500 Series Switches User Manual

Page 55

Configuration procedure

In this example, the CA runs Windows Server and has the SCEP add-on installed. The switch, host, and

CA can reach one another.

Configure the switch (HTTPS server):
# Configure a PKI entity, and set the common name to http-server1 and the FQDN to
ssl.security.com.

system-view

[Sysname] pki entity en

[Sysname-pki-entity-en] common-name http-server1

[Sysname-pki-entity-en] fqdn ssl.security.com

[Sysname-pki-entity-en] quit

# Create a PKI domain, specify the trusted CA as new-ca, the URL of the server for certificate
request as http://10.1.2.2/certsrv/mscep/mscep.dll, authority for certificate request as RA, and

the entity for certificate request as en.

[Sysname] pki domain 1

[Sysname-pki-domain-1] ca identifier new-ca

[Sysname-pki-domain-1] certificate request url

http://10.1.2.2/certsrv/mscep/mscep.dll

[Sysname-pki-domain-1] certificate request from ra

[Sysname-pki-domain-1] certificate request entity en

[Sysname-pki-domain-1] quit

# Create RSA local key pairs.

[Sysname] public-key loc al create rsa

# Retrieve the CA certificate.

[Sysname] pki retrieval-certificate ca domain 1

# Request a local certificate for the switch through SCEP.

[Sysname] pki request-certificate domain 1

# Create SSL server policy myssl, specify PKI domain 1 for the SSL server policy, and enable
certificate-based SSL client authentication.

[Sysname] ssl server-policy myssl

[Sysname-ssl-server-policy-myssl] pki-domain 1

Sysname-ssl-server-policy-myssl] client-verify enable

[Sysname-ssl-server-policy-myssl] quit

# Create certificate attribute group mygroup1 and configure a certificate attribute rule for it,

specifying that the distinguished name in the subject name includes the string of new-ca.

[Sysname] pki certificate attribute-group mygroup1

[Sysname-pki-cert-attribute-group-mygroup1] attribute 1 issuer-name dn ctn new-ca

[Sysname-pki-cert-attribute-group-mygroup1] quit

# Create certificate attribute-based access control policy myacp and configure a certificate
attribute-based access control rule, specifying that a certificate is considered valid when it matches

an attribute rule in certificate attribute group myacp.

[Sysname] pki certificate access-control-policy myacp

[Sysname-pki-cert-acp-myacp] rule 1 permit mygroup1

[Sysname-pki-cert-acp-myacp] quit

# Associate the HTTPS service with SSL server policy myssl.

This manual is related to the following products:

H3C S12500-X Series Switches H3C S9800 Series Switches H3C S9500E Series Switches H3C S5560 Series Switches H3C S5130 Series Switches H3C S5120 Series Switches H3C SR8800 H3C SR6600-X H3C SR6600 H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C WX3000E Series Wireless Switches H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points H3C SecPath F5020 H3C SecPath F5040 H3C VMSG VFW1000 H3C S10500 Series Switches