H3C Technologies H3C S12500 Series Switches - Manual (Page 133)

121
Figure 40 Network diagram
Upgrade procedure
1. Configure the FTP server (configuration varies with servers):
# Enable the FTP server.
system-view
[FTP-Server] ftp server enable
# Set the FTP username to aaa and password to hello.
[FTP-Server] local-user aaa
[FTP-Server-luser-aaa] password cipher hello
# Assign the FTP user the right to access the aaa directory.
[FTP-Server-luser-aaa] service-type ftp
[FTP-Server-luser-aaa] authorization-attribute work-directory flash:/aaa
2. Configure the device:
# Examine the free space of the Flash on the switch for memory insufficiency. If the free space is
not sufficient for the new application programs, delete unused files from the Flash. (Details not
shown.)
# Execute the save command to save the current configuration. (Details not shown.)
# Log in to the FTP server.
ftp 2.2.2.2
Trying 2.2.2.2 ...
Press CTRL+K to abort
Connected to 2.2.2.2.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(2.2.2.2:(none)):aaa
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Download the soft-version2.bin program from FTP server to the active MPU.
[ftp] binary
[ftp] get soft-version2.bin
[ftp] bye