Upgrading the system software, Specifying a startup system software image – H3C Technologies H3C S12500 Series Switches User Manual
Page 120
108
Task Command
Remarks
Upgrade the BootWare image on
a card (in IRF mode).
bootrom update file file-url chassis
chassis-number slot slot-number-list
Available in user view.
To upgrade the BootWare image of the OAM module on an MPU:
Task Command
Remarks
Upgrade the BootWare image of
the OAM module on an MPU (in
standalone mode).
oam-bootrom update file file-url
slot slot-number
Available in user view.
Upgrade the BootWare image of
the OAM module on an MPU (in
IRF mode).
oam-bootrom update file file-url
chassis chassis-number slot
slot-number
Available in user view.
Upgrading the system software
To upgrade the system software (in standalone mode):
1.
Use FTP, TFTP, or any other method to save the upgrade system software image file to the root
directory of the active MPU's storage medium (Flash or CF card).
2.
Copy the file to the root directory of the standby MPU's storage medium (Flash or CF card).
3.
Specify the file as the main startup system software image file on both MPUs. For more information,
see "
Specifying a startup system software image
4.
Reboot the switch to complete the upgrade.
To upgrade the system software (in IRF mode):
5.
Use FTP, TFTP, or any other method to save the upgrade system software image file to the root
directory of the global active MPU's storage medium (Flash or CF card).
6.
Copy the file to the root directory of the storage medium (Flash or CF card) on each MPU in the IRF
fabric.
7.
Specify the system software image file as the main startup system software image file on all the
MPUs. For more information, see "
Specifying a startup system software image
."
8.
Reboot the switch to complete the upgrade.
Specifying a startup system software image
You can specify one main startup system software image and one backup startup system software image
on each MPU. The main system software image is always preferred over the backup system image at
startup.
The startup system software image files must be saved in the root directory of the Flash or CF card. If a
partitioned CF card is used, the image files must be saved in the root directory of the first partition.
In FIPS mode, the specified file must pass authenticity verification before it can be set as a startup system
software image file.
To upgrade system software image:
- H3C S12500-X Series Switches H3C S9800 Series Switches H3C S9500E Series Switches H3C S5560 Series Switches H3C S5130 Series Switches H3C S5120 Series Switches H3C SR8800 H3C SR6600-X H3C SR6600 H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C WX3000E Series Wireless Switches H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points H3C SecPath F5020 H3C SecPath F5040 H3C VMSG VFW1000 H3C S10500 Series Switches