H3C Technologies H3C S12500 Series Switches - Manual (Page 32)

20
User interface
authentication
mode
User privilege level
switching
authentication
mode
Information required for
the first authentication
mode
Information required for the
second authentication mode
scheme
Password for privilege level
switching configured on the
AAA server. The system uses
the login username as the
privilege level switching
username.
N/A
scheme local
Password for privilege level
switching configured on the
AAA server. The system uses
the login username as the
privilege level switching
username.
Local user privilege level
switching password.
Changing the level of a command
Every command in a view has a default command level. The default command level scheme is sufficient
for the security and ease of maintenance requirements of most networks. If you want to change the level
of a command, make sure that the change does not result in any security risk or maintenance problem.
To change the level of a command:
Step Command Remarks
1. Enter system view. system-view N/A
2. Change the level of a
command in a specific view command-privilege level level view
view command
See Table 7 for the default settings.
Saving the running configuration
You can use the save command in any view to save all the submitted and executed commands into the
configuration file. Commands saved in the configuration file can survive a reboot. The save command
does not take effect on one-time commands, including display and reset commands. One-time
commands are never saved.
Displaying and maintaining CLI
Task Command Remarks
Display the command keyword
alias configuration. display command-alias [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Display data in the clipboard.
display clipboard [ | { begin | exclude |
include } regular-expression ]
Available in any view.