H3C Technologies H3C S12500 Series Switches - Manual (Page 69)

57
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter user interface view.
user-interface { first-num1
[ last-num1 ] | { aux | console |
vty } first-num2 [ last-num2 ] }
N/A
3. Enable command accounting. command accounting
By default, command accounting is
disabled. The accounting server
does not record the commands
executed by users.
Defining shortcut keys for starting terminal
sessions/aborting tasks
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter user interface view.
user-interface { first-num1
[ last-num1 ] | { aux | console |
vty } first-num2 [ last-num2 ] }
N/A
3. Define a shortcut key for
starting a terminal session.
activation-key character
Optional.
Pressing Enter starts the terminal
session by default.
This command is not supported on
VTY user interfaces.
4. Define a shortcut key for
aborting a task.
escape-key { default | character }
Optional.
The default shortcut key
combination for aborting a task is
Ctrl+C.
Sending messages to user interfaces
Task Command Remarks
Send messages to user interfaces.
send { all | num1 | { aux | console
| vty } num2 }
Available in user view.
Releasing connections to user interfaces
Multiple administrators can log in to the system simultaneously to configure the switch. When you want
to make configurations without interruption from other administrators, you can release other login
connections.
You cannot use this command to release the connection that you are using.