NewTek TriCaster Studio User Manual
Page 56
Page | 36
The controls in the Setup tab (Figure 28) are the audio
equivalent of the video Input Setup panel. They
permit you to assign each input as either Mic
(Microphone), Variable Gain, or Line level.
A Phantom Power option can be enabled as required
for Mic or Variable settings (typically for condenser
type microphones requiring external power).
At right, a tall VU meter shows left and right output
levels for the main audio output mix. A red Master
Volume knob below controls the main output level,
while another at the top governs output to the
headphone jack. (These controls are always visible).
The Audio Simple tab (Figure 29) provides volume
sliders and VU meters for each input (including the
DDRs.)
Solo and Mute switches are provided for each source
(including DDRs), while Talk Over is supplied only for
external inputs.
The Audio Advanced tab gives access to equalization
controls for each input. More detail on all of these
features is contained in Section 6.11.
Figure 28
Figure 29