Grandstream UCM6510 User Manual - Manual (Page 98)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 97 of 313
Figure 60: Edit Model Template
User could also click on “Add New Field” to add a P value number and the value to the configuration.
The following figure shows setting P value “P1362” to “en”, which means the display language on the
LCD is set to English. For P value information of different models, please refer to configuration
template here http://www.grandstream.com/support/tools .
• Click on Save when done. The model template will be displayed on web UI->PBX->Zero
Config->Model Templates page.
• Click on
to delete the model template or click on “Delete Selected Templates” to delete multiple
selected templates at once.
• Click on “Toggle Selected Template(s)” to toggle the status between enabled/disabled for the selected
model templates.