Grandstream UCM6510 User Manual - Manual (Page 209)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 208 of 313
to caller. The file can be uploaded from web GUI->Internal
Options->Custom Prompt, or click the ‘Prompt’ to add additional record.
Ring Timeout on Each Member
Configure the number of seconds to ring each member. If set to 0, it will
keep ringing. The default setting is 30 seconds.
Note:
The actual ring timeout might be overridden by users if the phone has ring
timeout settings as well.
Auto Record
Once this option is enabled, the calls using this extension or trunk will be
automatically recorded.
Enable Destination
If enabled, users could select extension, voicemail, ring group, IVR, call
queue, voicemail group as the destination if the call to the ring group has
no answer. Secret and Email address are required if voicemail is selected
as the destination.
Secret
Configure the password to access the ring group extension's voicemail.
Note:
The password has to be at least 4 characters.
Email Address
Configure the Email address of the ring group extension's voicemail. If
"Attach Recordings to E-mail" is enabled from web
GUI->PBX->Voicemail->Voicemail Email Settings, the voicemail can be
sent to the ring group's Email address as attachment.
Figure 111: Ring Group Configuration